house damage
Breaking Down the Short- and Long-Term Effects of Water Damage
May 17, 2021
toilet
How to Deal with Sewage Backup Issue
May 31, 2021
Show all

When Is It Okay to Perform DIY Water Damage Repairs?

water heater

Routine plumbing problems may cause more serious issues in your home if they are not immediately resolved. Busted pipes may cause severe water damage in certain areas of your home that are not built to withstand being exposed to water for long periods. This damage may have an adverse effect on if you plan to get a home inspection and sell your home later on. Water damage is one of the reg flags that will come up on a home inspection report. This is why you need to make sure that the damage is repaired before getting the inspection done.

Utah residents would be wise to call a professional water damage restoration company to help repair any affected areas of their homes in the case of flooding. If it’s just a small leak and you have some experience with construction, however, here are the steps to a DIY fix:

Quick and Easy Steps to Repairing Water Damage

1 – Find the Leak

The first step to fixing water damage is finding the leak and identifying the parts of your home that have been affected by the water. A thorough inspection is crucial to ensure that the repair addresses all the damage and your home will not suffer any lasting signs of water damage.

2 – Get Rid of the Damaged Drywall

Next, you will need to remove all the damaged drywall in the area. There may be mold buildup on the interior part of the wall, so you need to take the necessary precautions to keep your safe as you remove the drywall.wear safety gear such as gloves, a facemask and goggles to protect yourself. If you need help with dealing with this, calling a mold abatement team in Utah is the right decision.

3 – Perform the Repairs

Once you have zeroed in on the area, you will be ready to replace the drywall you had just taken out. It is critical that you measure the exact size before replacing, so that the new wall doesn’t look out of place. Be careful when you apply the adhesive and make sure that your new wall is aligned and placed properly. 

4 – Priming and Painting

After you have replaced your wall, the next step is to prime and paint it. For this step, you will need to make sure that the area is well-ventilated. Open your windows and use a fan to help encourage the paint to dry faster.

Conclusion

Whether you need to repair water and Utah flood damage because you are planning to sell your home or because you want to improve your home environment, you cannot afford to make any missteps during your repairs. Making sure to follow this step-by step guide will help you avoid committing any mistakes as you take on the challenge of doing a DIY repair. These steps will help ensure that you will be able to complete your restoration successfully.

It’s important to note, however, that water damage repairs are nothing like simple home repairs like a crack in the wall. A poor DIY job could leave you with very expensive repercussions later on. If you want to be sure that the water damage repairs are done right, contacting a water repair company is the better choice.

Should you need help dealing with water and flood damage in Utah, AAA Restoration Utah can help! Along with repairing flood damage, we are also certified in mold removal, fire clean-up, odor control, upholstery cleaning, commercial and residential carpet cleaning and floor installation. Call 801-263-9990 for an appointment!